Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    jnxAtmTrunkTable

    The jnxAtmTrunkTable, whose object identifier is {jnxAtm 4}, contains information related to ATM trunks. Each jnxAtmTrunkEntry in jnxAtmTrunkTable contains the objects listed in Table 1.

    Note: If the encapsulation type for the logical interface to which the trunk belongs is atmCccCellRelay, only the generic trunk information (jnxAtmTrunkConnType, jnxAtmTrunkEncapsulation, nxAtmTrunkFlags, and jnxAtmTrunkTotalDownTime) is valid.

    Table 1: jnxAtmTrunkTable

    Object

    Object ID

    Description

    jnxAtmTrunkId

    jnxAtmTrunkEntry 1

    Represents the identifier of the ATM trunk.

    jnxAtmTrunkConnType

    jnxAtmTrunkEntry 2

    Indicates the type of connection. This object uses the following integer values to denote the type of connection:

    • 1 other
    • 2 P2P

    jnxAtmTrunkEncapsulation

    jnxAtmTrunkEntry 3

    Represents the ATM encapsulation type associated with the VC or trunk. This object uses the following integer values to denote the encapsulation type:

    • 1 other
    • 2 atmCccCellRelay

    jnxAtmTrunkFlags

    jnxAtmTrunkEntry 4

    Represents the flags related to the trunk.

    jnxAtmTrunkTotalDownTime

    jnxAtmTrunkEntry 5

    Indicates the total downtime (in seconds) for the trunk since the last reboot of the system.

    jnxAtmTrunkInBytes

    jnxAtmTrunkEntry 6

    Indicates the number of bytes received on the trunk.

    jnxAtmTrunkOutBytes

    jnxAtmTrunkEntry 7

    Indicates the number of bytes sent out on the trunk.

    jnxAtmTrunkInPkts

    jnxAtmTrunkEntry 8

    Indicates the number of packets received on the trunk.

    jnxAtmTrunkOutPkts

    jnxAtmTrunkEntry 9

    Indicates the number of packets sent out on the trunk.

    jnxAtmTrunkTailQueuePktDrops

    jnxAtmTrunkEntry 10

    Represents the number of packets that were dropped because of bandwidth constraints. This object indicates that the packets were queued to be transmitted at a rate faster than allowed.

    jnxAtmTrunkInOAMF4AISCells

    jnxAtmTrunkEntry 15

    Indicates the number of OAM F4 cells that are received with AIS (Alarm Indication Signal) bit set.

    jnxAtmTrunkOutOAMF4AISCells

    jnxAtmTrunkEntry 16

    Indicates the number of OAM F4 cells that are sent out with AIS bit set.

    Published: 2013-11-22