Related Documentation
jnxUserAAAAccessPool
jnxUserAAAAccessPoolTable, whose object ID is { jnxUserAAAAccessPoolTable 1 }, provides the ability to track address resource usage off-chassis. jnxUserAAAAccessPoolTable objects are listed in Table 1.
Table 1: jnxUserAAAAccessPoolTable
Object | Object ID | Description |
|---|---|---|
jnxUserAAAAccessPoolRoutingInstance | jnxUserAAAAccessPoolEntry 1 | Routing instance of the address pool. |
jnxUserAAAAccessPoolName | jnxUserAAAAccessPoolEntry 2 | Address pool name. |
jnxUserAAAAccessPoolLinkName | jnxUserAAAAccessPoolEntry 3 | Address pool link name. |
jnxUserAAAAccessPoolFamilyType | jnxUserAAAAccessPoolEntry 4 | Family type of this pool. |
jnxUserAAAAccessPoolInetNetwork | jnxUserAAAAccessPoolEntry 5 | Match criteria for this pool. Network or Prefix. |
jnxUserAAAAccessPoolInetPrefixLength | jnxUserAAAAccessPoolEntry 6 | Prefix length for an IPv6 pool. |
jnxUserAAAAccessPoolOutOfMemory | jnxUserAAAAccessPoolEntry 7 | Number of times this pool has flagged an Out of Memory condition. |
jnxUserAAAAccessPoolOutOfAddresses | jnxUserAAAAccessPoolEntry 8 | Number of times this pool has flagged an Out of Address condition. |
jnxUserAAAAccessPoolAddressTotal | jnxUserAAAAccessPoolEntry 9 | Total number of addresses or prefixes in this pool. |
jnxUserAAAAccessPoolAddressesInUse | jnxUserAAAAccessPoolEntry 10 | Total number of addresses or prefixes given out from this pool. |
jnxUserAAAAccessPoolAddressUsage | jnxUserAAAAccessPoolEntry 11 | Percentage of addresses used in this pool or linked pool. If this pool is the head of a linked chain of pools, this number reflects the usage for the entire chain. If this pool is part of a linked chain of pools, but not the head of the chain, the value is not used. |
jnxUserAAAAccessPoolAddressUsageHigh | jnxUserAAAAccessPoolEntry 12 | Configured high percentage threshold of addresses used in this pool or linked pool. An SNMP trap is generated when this threshold is exceeded. This trap is generated only for unlinked pools or pools that are the head of a linked chain of pools. If this pool is part of a linked chain of pools, but not the head of the chain, then no traps are generated. |
jnxUserAAAAccessPoolAddressUsageAbate | jnxUserAAAAccessPoolEntry 13 | Configured abate percentage threshold of addresses used in this pool or linked pool. An SNMP trap clear is generated when address use falls below this threshold percentage. This trap is generated only for unlinked pools or pools that are the head of a linked chain of pools. If this pool is part of a linked chain of pools, but not the head of the chain, then no traps are generated. |
