Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring a Trunk Interface on a Bridge Network

 

On MX Series routers, you can configure a trunk interface on a bridge network.

The following output sample shows trunk port configuration on a bridge network:

user@host# run show interfaces

If you want igmp-snooping to be functional for a bridge domain, then you should not configure interface-mode and irb for that bridge domain. Such a configuration commit succeeds, but IGMP snooping is not functional, and a message informing the same is displayed as shown after the sample configuration below:

user@host# run show configuration
user@host# commit

To achieve IGMP snooping for a bridge domain, you should use such a configuration as shown in the following example:

user@host# run show configuration
user@host# commit