Monitoring Firewall Authentication
Purpose
Use the monitoring functionality to view the firewall authentication page.
Action
To monitor firewall authentication, select Monitor>Security>Firewall Authentication in the J-Web user interface if you are using SRX5400, SRX5600, or SRX5800 platforms.
Or
Select Monitor>Security>Authentication>Firewall Auth in the J-Web user interface.
Meaning
Table 1 summarizes key output fields in the firewall authentication page.
Table 1: Firewall Authentication Monitoring Page
Field | Value | Additional Information |
---|---|---|
Virtual Chassis Member | Displays the list of virtual chassis member. | Select one of the virtual chassis members listed. |
Refresh Interval (30 sec) | Displays the time interval set for page refresh. | Select the time interval from the drop-down list. |
Refresh | Displays the option to refresh the page. | – |
Clear | Provides an option to clear the monitor summary. | Click Clear to clear the monitor summary. |
User Table | ||
ID | Displays the authentication identification number. | – |
Source IP | Displays the IP address of the authentication source. | – |
Age | Displays the idle timeout for the user. | – |
Status | Displays the status of authentication (success or failure). | – |
User | Displays the name of the user. | – |
History Table | ||
ID | Displays the identification number. | – |
Source IP | Displays the IP address of the authentication source. | – |
Duration | Displays the authentication duration. | – |
Status | Displays the status of authentication (success or failure). | – |
User | Displays the name of the user. | – |