Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Verifying LACP on Redundant Ethernet Interfaces

 

Purpose

Display LACP status information for redundant Ethernet interfaces.

Action

From operational mode, enter the show lacp interfaces reth0 command.

user@host> show lacp interfaces reth0

The output shows redundant Ethernet interface information, such as the following:

  • The LACP state—Indicates whether the link in the bundle is an actor (local or near-end of the link) or a partner (remote or far-end of the link).

  • The LACP mode—Indicates whether both ends of the aggregated Ethernet interface are enabled (active or passive)—at least one end of the bundle must be active.

  • The periodic link aggregation control PDU transmit rate.

  • The LACP protocol state—Indicates the link is up if it is collecting and distributing packets.