Verifying That Policers Are Operational
After you configure policers and include them in firewall filter configurations, you can perform the following tasks to verify that the policers configured on EX Series switches are working properly.
Use the operational mode command to verify that the policers on the switch are working properly:
user@switch> show policer
Filter: egress-vlan-watch-employee Filter: ingress-port-filter Filter: ingress-port-voip-class-limit-tcp-icmp Policers: Name Packets icmp-connection-policer 0 tcp-connection-policer 0 Filter: ingress-vlan-rogue-block Filter: ingress-vlan-limit-guest
The show policer command displays the names of all firewall filters and policers that are configured on the switch. For each policer that is specified in a filter configuration, the output field shows the current packet count for all packets that exceed the specified rate limits.