Verifying the Configuration of Shaping-Rate Adjustments for Subscriber Local Loops
Display the configured shaping rate and the adjusted shaping rate for each logical interface set configured for hierarchical CoS.
After shaping-rate adjustments are enabled and the router has performed shaping-rate adjustments on a scheduler node, you can configure a new shaping rate by including the shaping-rate statement in a traffic-control profile and then applying that profile to that scheduler node. However, this new shaping-rate value does not immediately result in shaping traffic at the new rate. The scheduler node continues to be shaped at rate set by ANCP. Only when the ANCP shaping-rate adjustment feature is disabled is the scheduler node shaped at the newly configured shaping-rate.
Issue the show class-of-service interface-set operational command.