Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Monitoring a Routing Matrix with a TX Matrix Router

 

There are a variety of other useful commands you can use to monitor a routing matrix with a TX Matrix router.

  • To display the location of routing matrix components and convert FPCs from T640 router local numbering to routing matrix global numbering, issue the show chassis location fpc command on the TX Matrix router:

    user@router> show chassis location fpc
  • To check the status of the SIB connection between the TX Matrix router and T640 routers, issue the show chassis fabric topology command on the TX Matrix router. All values for each available T640 router (LCC) should be in the UP state. In the following excerpt of output for this command, a routing matrix that contains only LCCs 0 and 2 shows only these two T640 routers as being UP:

  • To verify that the Ethernet links between the TX Matrix router and the T640 router control boards are operational, issue the show chassis ethernet-switch command on the TX Matrix router:

    user@router> show chassis ethernet-switch