Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Starting the J-Web User Interface

    Before you start the user interface, you must perform the initial device configuration described in the Getting Started Guide for your device. After the initial configuration, you use your username and password, and the hostname or IP address of the device, to start the user interface.

    To start the J-Web user interface:

    1. Launch your HTTP-enabled or HTTPS-enabled Web browser.

      To use HTTPS, you must have installed the certificate provided by the device.

      Note: If the device is running the worldwide version of the Junos OS and you are using the Microsoft Internet Explorer Web browser, you must disable the Use SSL 3.0 option in the Web browser to access the device.

    2. Type http:// or https:// in your Web browser followed by the hostname or IP address of the device, and press Enter.

      The J-Web login page appears.

    3. Type your username and password, and click Log In.

      To correct or change the username or password you typed, click Reset, type the new entry or entries, and click Log In.

      Note: The default username is root with no password. You must change this during initial configuration or the system does not accept the configuration.

    To explicitly terminate a J-Web session at any time, click Logout in the top pane.

    Modified: 2017-09-13