Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Setting J-Web Session Limits

    By default, an unlimited number of users can log in to the J-Web interface on a Juniper Networks device, and each session remains open for 24 hours (1440 minutes). Using CLI commands, you can limit the maximum number of simultaneous J-Web user sessions and set a default session timeout for all users.

    • To limit the number of simultaneous J-Web user sessions, enter the following commands:
      user@host# edit system services web-management session
      user@host# set session-limit session-limit

      Range: 1 through 1024. Default: Unlimited

    • To change the J-Web session idle time limit, enter the following commands:
      user@host# edit system services web-management session
      user@host# set idle-timeout minutes

      Range: 1 through 1440. Default: 1440

    You can also configure the maximum number of simultaneous subordinate HTTP processes that the device creates in response to user requests.

    To configure the maximum number of subordinate httpd processes, enter the following commands:

    user@host# edit system services web-management limits

    user@host# active-child-process process-limit

    The default is 5, and the range is 0 through 32.

    Modified: 2017-09-13