Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Dynamically Attaching Statically Created Filters for a Specific Interface Family Type

 

You can dynamically attach statically created filters for either IPv4 (inet) or IPv6 (inet6) interface types. These filters apply only to interfaces of the specified type.

Before you can attach a statically created filter using a dynamic profile.

  1. Create the filters you want to attach.

    See Firewall Filters Overview for information about classic firewall filters and how to create them. See Configuring Fast Update Filters for information about creating fast update filters.

  2. Create a basic dynamic profile.

    See Configuring a Basic Dynamic Profile.

To dynamically attach statically created input and output filters:

  1. Specify the unit family type you want to use when dynamically attaching the filters.
    1. For IPv4 interfaces, specify the inet unit family.
    2. For IPv6 interfaces, specify the inet6 unit family.
  2. Specify the input filter in the dynamic profile.
  3. Specify the output filter in the dynamic profile.Note

    The following example specifies an optional precedence value for the output filter.