Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Static Underlying VLAN Interfaces to Use Agent Circuit Identifier Information

 

After you define the agent circuit identifier (ACI) interface set, you must configure the underlying VLAN interface to enable creation of dynamic VLAN subscriber interfaces based on ACI information. You can configure the underlying VLAN interface statically or dynamically.

This topic describes how to configure the underlying VLAN interface statically.

To configure a static underlying VLAN interface to use ACI information:

  • Associate the dynamic profile that defines the ACI interface set with the static underlying VLAN interface.

    For example, the following statement associates static Gigabit Ethernet VLAN interface ge-1/0/0.0 with the dynamic profile aci-vlan-set-profile that defines the ACI interface set.

The following example shows the static configuration that uses this statement. This configuration enables the underlying VLAN interface ge-1/0/0.0 to create dynamic subscriber interfaces based on ACI information by applying a single default ACI interface set dynamic profile (aci-vlan-set-profile) to all households on the VLAN interface.