Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Attaching Access Profiles

 

After you have created the access profile that specifies the subscriber authentication and accounting parameters, you must specify where the profile is used. Authentication and accounting will not run unless you specify the profile. Subscriber management supports attaching access profiles at the following hierarchy levels:

  • [edit]

  • [edit routing-instances routing-instance-name]

  • [edit logical-systems logical-system-name routing-instances routing-instance-name]

  • [edit interfaces interface-name auto-configure vlan-ranges]

  • [edit interfaces interface-name auto-configure stacked-vlan-ranges]

To attach an access profile:

  1. Edit the desired hierarchy level.
  2. Specify the name of the access profile that you want to attach. For example: