Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring SONET/SDH Rate-Selectability

 

You can configure rate selectability on the SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP, Channelized SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP, and Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP by specifying the port speed.

To configure the rate selectability:

  1. In configuration mode, go to the [edit chassis fpc slot-number pic pic-number port port-number] hierarchy level.
  2. Configure the speed option to enable rate selectability on SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP, Channelized SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP, and Channelized OC3/STM1 (Multi-Rate) Circuit Emulation MIC with SFP.
Note
  • By default, rate selectability is enabled on the SONET/SDH OC3/STM1 (Multi-Rate) MICs with oc3-stm1 speed.

  • You cannot disable the rate selectability on the 4-port SONET/SDH OC3/STM1(Multi-Rate) MIC and the Channelized SONET/SDH OC3/STM1 (Multi-Rate) MICs with SFP.

To disable the rate selectability feature on the 8-port SONET/SDH OC3/STM1 (Multi-Rate) MIC:

  1. In configuration mode, go to the [edit chassis fpc slot-number pic pic-number port port-number] hierarchy level.
  2. Configure the no-multi-rate option to disable rate selectability.