Displaying APS Using a Container Interface with ATM Encapsulation
Displaying APS Using a Container Interface with ATM Encapsulation
Purpose
Display APS using a container interface with ATM encapsulation.
Action
To display APS using a container interface with ATM encapsulation atm-pvc where the configuration of a parent container interface ci0 and the resulting automatic configuration of its children (at-0/0/0 and at-0/0/1), perform the following steps:
- In configuration mode, go to the [edit interfaces] hierarchy level.[edit]user@host# edit interfaces
- Issue the show operational mode command.[edit interfaces]user@host# show
- The following output is displayed.
at-0/0/0 { container-options { container-list ci0; primary; } } at-0/0/1 { container-options { container-list ci0; standby; } } ci0 { encapsulation atm-pvc; atm-options { vpi 0 { oam-period 3; } ilmi; } container-options { container-type { aps; } member-interface-type { atm { member-interface-speed oc3; } } } unit 0 { vci 100; oam-period 3; family inet { address 10.0.0.1/30; } } unit 1 { vci 200; oam-period 3; family inet { address 192.168.0.1/30; } } }
Displaying the APS Container Interface Configuration
Purpose
To display the APS container interface configuration
Action
You can use the following show operational mode commands to view the APS container interface configuration:
show aps
show aps extensive
show interfaces cin extensive
show interfaces at-fpc/pic/port extensive
See the CLI Explorer.