Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Application Tracking Configuration Page Options

 
  1. Select Configure>Security Objects>App Tracking in the J-Web user interface.

    The Application Tracking configuration page appears. Table 1 explains the contents of this page.

  2. Click Save to save the configuration.
  3. Click Cancel to remove all the entries of the configuration.

Table 1: Application Tracking Configuration Page

FieldFunctionAction
Application Tracking

Application tracking

Enables or disables application tracking.

Select this option to enable application tracking.

Logging Type

You can set the following:

  • Log as session(s) created—Generates a log message when a session is created. By default, this option is disabled.

  • Delay logging first session(s)—Enables you to specify the length of time that must pass before the first log message is created. The default is 1 minute.

Select an option.

First Update Interval (min)

Interval when the first update message is sent (minutes).

Use the up/down arrow to set the interval time.

Session Update Interval (min)

Enables you to set the interval at which update messages are sent. Default is 5 minutes.

Use the up/down arrow to set the interval time.

Application Tracking By Zone

Lists the available zones.

  • To enable application tracking, select the zone and click the right arrow to move it to the tracking enabled list.

  • To disable application tracking, select the zone and then click the left arrow to move the zone back into the available list.