Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring NTP Authentication Keys

 

Time synchronization can be authenticated to ensure that the switch obtains its time services only from known sources. By default, network time synchronization is unauthenticated. The switch will synchronize to whatever system appears to have the most accurate time. We strongly encourage you to configure authentication of network time services.

To authenticate other time servers, include the trusted-key statement at the [edit system ntp] hierarchy level. Only time servers that transmit network time packets containing one of the specified key numbers are eligible to be synchronized. Additionally, the key needs to match the value configured for that key number. Other systems can synchronize to the local switch without being authenticated.

Each key can be any 32-bit unsigned integer except 0. Include the key option in the peer, server, or broadcast statements to transmit the specified authentication key when transmitting packets. The key is necessary if the remote system has authentication enabled so that it can synchronize to the local system.

To define the authentication keys, include the authentication-key statement at the [edit system ntp] hierarchy level:

number is the key number, type is the authentication type (only Message Digest 5 [MD5] is supported), and password is the password for this key. The key number, type, and password must match on all systems using that particular key for authentication.