Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Layer 2 Protocol Tunneling on ACX Series

    To configure Layer 2 protocol tunneling:

    1. Enable MAC address rewriting for Layer 2 protocol tunneling:
      [edit]
      user@host# edit protocols layer2-control mac-rewrite
    2. Configure the Layer 2 protocol tunnel interface:
      [edit ... protocols layer2-control mac-rewrite]
      user@host# edit interface ge-fpc/pic/port
    3. Configure the Layer 2 protocol to be tunneled:
      [edit protocols layer2-control mac-rewrite interface ge-fpc/pic/port]
      user@host# set protocol (cdp | stp | vtp | ieee802.1x | ieee802.3ah | elmi | lacp | lldp | mmrp | mvrp)
    4. Verify the configuration:

      user@host# show protocols
      interface ge-fpc/pic/port {
      protocol (cdp | stp | vtp | ieee802.1x | ieee802.3ah | elmi | lacp | lldp | mmrp | mvrp);
      }
      }
      }

    Modified: 2016-11-03