Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Applying the Policers to Dynamic Profile Interfaces

 

This configuration shows how to apply policers to a dynamic profile.

Before you can apply policers, you need to have configured your policers as described in:

To configure the dynamic profiles:

  1. Create a dynamic profile for the three-color policer.
  2. Create a dynamic profile interface that has a dynamic underlying interface unit.
  3. Specify that VPLS is the protocol family.
  4. Assign the three-color policer to the dynamic profile.
  5. Create a dynamic profile for the two-color policer.
  6. Create a dynamic profile interface that has a dynamic underlying interface unit.
  7. Specify that VPLS is the protocol family.
  8. Assign the two-color policer to the dynamic profile.