Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Wavelengths on the Integrated Photonic Line Card Add and Drop Ports

 

To configure the IPLC to add or drop a specific wavelength:

  1. Specify the slot location of the IPLC module and access the IPLC configuration hierarchy.

    For example, if the IPLC module resides in slot 1, enter the following:

  2. Specify the wavelength you want to support.

    For example, to support wavelength 1550.12, enter:

    Note

    You can only specify the wavelengths listed here wavelength. If you enter an unsupported value you are prompted with an error message.

  3. Verify that the configuration. For example:
  4. If the configuration is correct, save it.
  5. Complete your configuration by configuring the port to switch the wavelengths to an optical interface on the local or remote chassis. See, Configuring the Integrated Photonic Line Card to Switch Wavelengths to Local or Remote Optical Interfaces.