Gigabit Ethernet OTN Options
The following example shows the configuration settings for Gigabit Ethernet OTN options:
[edit interfaces ge-fpc/pic/port]
bytes (otn-options) transmit-payload-type value;
fec (efec | gfec
| gfec-sdfec | none );
(laser-enable |
no-laser-enable);
(line-loopback |
no-line-loopback);
(local-loopback | no-local-loopback);
}
tca tca-identifier (enable-tca | no-enable-tca)
(threshold number | threshold-24hrs number);
trigger trigger-identifier;
tti tti-identifier;
}
The Gigabit Ethernet interface and the XENPAK interface support the read/write overhead bytes only for the APS/PPC (bytes 0 through 3).
You can use the following show commands to view the OTN configuration:
show interfaces extensive—See the CLI Explorer for command details.
show chassis hardware—See the CLI Explorer for command details.
show chassis pic—See the CLI Explorer for command details.