Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring PRI Interfaces

 

When you create a PRI from a channelized E1 or channelized T1 interface, you can select all the slots for the PRI, or just a few of them, leaving the rest as ds- interfaces.

To configure a PRI from a channelized T1 interface, include the partition statement at the [edit interfaces ct1-pim/0/port] hierarchy level with the timeslots statement and interface-type bc specified:

This configuration creates interfaces ds-pim/0/port:1 through pr-pim/0/port:2.

Use the same configuration to create interfaces on a channelized E1 interface by including the partition statement and options at the [edit interfaces ce1-pim/0/port] hierarchy level.

To configure channelized E1 interface properties, include the e1-options statement at the [edit interfaces interface-name] hierarchy level:

To specify options for each of the DS0 channels, include the ds0-options statement at the [edit interfaces interface-name] hierarchy level: