Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Communication with Directly Attached ATM Switches and Routers

 

For ATM1 and ATM2 IQ interfaces, you can configure communication with directly attached ATM switches and routers to enable querying of the IP addresses and switch port numbers. You query the switch or router by entering the following show command:

The router uses VC 0.16 to communicate with the ATM switch or router.

To configure communication between the router and its directly attached ATM switches and routers, include the ilmi statement at the [edit interfaces interface-name atm-options] hierarchy level:

For example, to configure Communication with Directly Attached ATM Switches and Routers:

  1. Enable an interface to communicate directly with an ATM switch or router:

Related Documentation