Configuring the Optical ILA Identification Number
To enable optical supervisory channel (OSC) communications and manage optical inline amplifiers (ILA)s in the amplifier chain through the Junos CLI, you need to configure each optical ILA with a unique number. This number identifies the optical ILA within the PTX3000 integrated photonic line system and Junos CLI. Use this procedure when you are using the PTX3000 integrated photonic line system with the optical ILA to enable OSC communication across the optical network or to enable management of certain optical ILA parameters through the Junos OS CLI.
Remember that all communication to and from an optical ILA is through the anchor IPLC, so when you configure any options on an optical ILA, you must specify the FPC number in which the anchor IPLC resides.
To configure any other optical ILA options, use the login procedures describe in the Optical Inline Amplifier Hardware Guide.
Before you begin, make sure you complete the following tasks:
Configure the IPLC anchor for the amplifier chain, see Configuring the Anchor IPLC of the Amplifier Chain.
Configure the IP address of the anchor IPLC. See, Configuring the IP Address of the Anchor IPLC.
Configure the MAC address of the anchor IPLC. See, Configuring the MAC Address of the Anchor IPLC
Configure the IP address of the optical ILA. See, Configuring the IP Address of an Optical Inline Amplifier
To configure the identification number for the optical ILA:
- Specify the slot in which the IPLC resides and access
the IPLC amplifier chain configuration hierarchy.user@host# edit chassis fpc fpc-number optical-options amplifier-chain ila ila-number
- Specify the identification number for the optical ILA