Configuring the Content Destination for Dynamic Flow Capture on M, MX and T Series Routers
You must specify a destination for the packets that match dynamic flow capture filter criteria. To configure, include the content-destination statement at the [edit services dynamic-flow-capture capture-group client-name] hierarchy level:
[edit services dynamic-flow-capture capture-group client-name]
content-destination identifier {
address address;
ttl hops;
}
Assign the content-destination a unique identifier. In addition, you must specify its IP address, and you can optionally set a time-to-live (TTL) value for the IP-IP header:
address—The dynamic flow capture interface appends an IP header with this destination address on the matched packet (with its own IP header and contents intact) and sends it out to the content destination.
ttl—By default, the TTL value is 255, with a range from 0 through 255.