Configuring System Identity for an EX Series Switch (J-Web Procedure)
This topic applies only to the J-Web Application package.
To configure identification details for an EX Series switch:
- Select Configure > System Properties > System Identity. The System Identity page displays configuration details.
- To modify the configuration, click Edit. Enter
information into the System Identity page as described in Table 1.
After you make changes to the configuration on this page, you must commit the changes for them to take effect. To commit all changes to the active configuration, select Commit Options > Commit. See Using the Commit Options to Commit Configuration Changes for details about all commit options.
Table 1: System Identity Configuration Summary
Defines the hostname of the switching platform.
Type the hostname.
Defines the network or subnetwork that the machine belongs to.
Type the domain name.
Sets the root password that user root can use to log in to the switching platform.
Type a plain-text password. The system encrypts the password.
Note: After a root password has been defined, it is required when you log in to the J-Web user interface or the CLI.
Confirm Root Password
Verifies that the root password has been typed correctly.
Retype the password.
DNS Name Servers
Specifies a DNS server for the switching platform to use to resolve hostnames into addresses.
To add an IP address, click Add.
To edit an IP address, click Edit.
To delete an IP address, click Delete.
Specifies the domains to be searched.
To add a domain, click Add.
To edit a domain click Edit.
To delete a domain, click Delete.