Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Customer VLAN (Level 3) Shaping on Enhanced Queuing DPCs

 

Customer VLAN (level 3) shaping on an MX Series 10-Gigabit Ethernet Enhanced Queuing DPC differs from the customer VLAN (level 3) shaping on an MX Series 1-Gigabit Ethernet Enhanced Queuing DPC. To use the customer VLAN (level 3) shaping on an MX Series 10-Gigabit Ethernet Enhanced Queuing DPC, configure an interface set at the [edit interfaces interface-set] hierarchy level. You do not need to configure the interface set while using customer VLAN (level 3) on an MX Series 1-Gigabit Ethernet Enhanced Queuing DPC.

To configure customer VLAN (level 3) shaping on an MX Series 10-Gigabit Ethernet Enhanced Queuing DPC:

  1. Configure the interface set at the [edit interfaces] hierarchy level.
  2. Configure the hierarchical scheduler and enable VLAN tagging.
  3. Configure the logical interface properties.
  4. Configure the traffic control profiles at the [edit class-of-service] hierarchy level.
  5. Configure the output traffic control profiles at the [edit class-of-service interfaces] hierarchy level.

To configure customer VLAN (level 3) shaping on an MX Series 1-Gigabit Ethernet Enhanced Queuing DPC:

  1. Configure the interface set at the [edit interfaces] hierarchy level.
  2. Configure the hierarchical scheduler and enable the VLAN tagging.
  3. Configure the logical interface properties.
  4. Configure the traffic control profiles at the [edit class-of-service] hierarchy level.
  5. Configure the traffic control profiles at the [edit class-of-service interfaces] hierarchy level.