Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring the Junos OS to Use ATM Cell-Relay Accumulation Mode on an ATM1 PIC

 

You can configure an Asynchronous Transfer Mode (ATM) 1 PIC to use cell-relay accumulation mode. In this mode, the incoming cells (one to eight cells) are packaged into a single packet and forwarded to the label-switched path (LSP). At the edge router, this packet is divided in to individual cells and transmitted over the ATM interface.

Note

When you configure an ATM PIC to use cell-relay accumulation, all ports on the ATM PIC use cell-relay accumulation mode.

To configure an ATM PIC to use cell-relay accumulation mode, include the atm-cell-relay-accumulation statement at the [edit chassis fpc slot-number pic pic-number] hierarchy level:

On a TX Matrix or TX Matrix Plus router, include the atm-cell-relay-accumulation statement at the [edit chassis lcc number fpc slot-number pic pic-number] hierarchy level: