Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

System Requirements for a Routing Matrix with a TX Matrix Plus Router

 

To implement a routing matrix with a TX Matrix Plus router, your system must meet the following minimum requirements:

  • One to four Juniper Networks T1600 Core Routers—Junos OS Release 9.6 or later is required.

    • The TX Matrix Plus router must contain the following components:

      • Two C2600 Routing Engines—Model RE-DUO-C2600-16G

      • Two LCC-CB Control Boards (CBs)—Model CB-LCC

      • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-F13

      • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-F2S

    • The T1600 router must contain the following components:

      • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G

      • Two LCC-CB Control Boards (CBs)—Model CB-LCC

      • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-T1600

      • One rear fan tray—Model FAN-REAR-TXP-LCC

  • Up to eight Juniper Networks T1600 Core Routers—Junos OS Release 13.1 or later is required.

    • The TX Matrix Plus router must contain the following components:

      • Two C2600 Routing Engines—Model RE-DUO-C2600-16G

      • Two LCC-CB Control Boards (CBs)—Model CB-LCC

      • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F13

      • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F2S

      • Fan tray—Model PWR-TRAY-TXP-5-60-DC

    • The T1600 router must contain the following components:

      • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G

      • Two LCC-CB Control Boards (CBs)—Model SIB-TXP-3D-LCC

      • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-3D-T1600

      • One rear fan tray—Model FAN-REAR-TXP-3D-LCC

      • Two power supplies—PWR-T-6-60-DC

    For information about upgrading a standalone T1600 router and integrating it into a routing matrix, see the TX Matrix Plus Router Hardware Guide  .

  • Two to four Juniper Networks T4000 Core Routers—Junos OS Release 13.1 or later is required.

    • The TX Matrix Plus router must contain the following components:

      • Two C2600 Routing Engines—Model RE-DUO-C2600-16G

      • Two LCC-CB Control Boards (CBs)—Model CB-LCC

      • F13 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F13

      • F2 SIB Switch Interface Boards (SIBs)—Model SIB-TXP-3D-F2S

      • Fan tray—Model PWR-TRAY-TXP-5-60-DC

    • The T4000 router must contain the following components:

      • Two C1800 Routing Engines—Model RE-DUO-C1800-8G or RE-DUO-C1800-16G

      • Two LCC-CB Control Boards (CBs)—Model SIB-TXP-3D-LCC

      • Five TXP-T1600 Switch Interface Boards (SIBs)—Model SIB-TXP-3D-T1600

      • One rear fan tray—Model FAN-REAR-TXP-3D-LCC

      • Two power supplies—PWR-T-6-60-DC

    For information about upgrading a standalone T1600 router and integrating it into a routing matrix, see the TX Matrix Plus Router Hardware Guide  .

  • Physical Interface Cards (PICs) of your choice. To view a list of supported PICs, see the T1600 Interface Module Reference.