Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Managed Objects for jnxSoamLmMeasuredStatsTable

    The jnxSoamLmMeasuredStatsTable, whose object identifier is {jnxSoamPmLmObjects 2}, contains the jnxSoamLmMeasuredStatsEntry that signifies the Ethernet loss measurement (ETH-LM) statistical details. Each jnxSoamLmMeasuredStatsEntry, whose object identifier is {jnxSoamLmMeasuredStatsTable 1}, contains the objects listed in the following table.

    The jnxSoamLmMeasuredStatsTable contains the last measured results for a SOAM Loss Measurement session. Each row in the table represents a Loss Measurement session for the defined MEP. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MaNet, and MEP tables. The fourth index is the specific LM session on the selected MEP. Instances of this managed object are created automatically by the SNMP Agent when the Loss Measurement session is running. Each object in this table applies only if the corresponding bit is set in jnxSoamLmCfgMeasurementEnable. The objects in this table do not need to be persistent upon reboot or restart of a device.

    Table 1: jnxSoamLmMeasuredStatsTable

    Object

    Object ID

    Description

    jnxSoamLmMeasuredStatsForwardFlr

    jnxSoamLmMeasuredStatsEntry 1

    Contains the last frame loss ratio in the forward direction calculated by this MEP. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in milli-percent, where 1 indicates 0.001 percent.

    jnxSoamLmMeasuredStatsBackwardFlr

    jnxSoamLmMeasuredStatsEntry 2

    Contains the last frame loss ratio in the backward direction calculated by this MEP. The FLR value is a ratio that is expressed as a percent with a value of 0 (ratio 0.00) through 100000 (ratio 1.00). Units are in milli-percent, where 1 indicates 0.001 percent.

    Modified: 2017-09-13