Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Managed Objects for jnxSoamPmNotificationObj Table

    The jnxSoamPmNotificationObj table, whose object identifier is {jnxSoamPmMibObjects 5}, contains the objects listed in the following table.

    Table 1: jjnxSoamPmNotificationObj Table

    Object

    Object ID

    Description

    jnxSoamPmNotificationObjDateAndTime

    jnxSoamPmNotificationObj 1

    Contains the time and date at the time that the notification event is detected, not the time of the notification generation. This object is used only for notifications. The mechanism to set and keep current the date and time is not specified.

    jnxSoamPmNotificationObj 2

    Denotes the object identifier of the object that caused the generation of the notification from the jnxSoamLmThresholdEntry or jnxSoamDmThresholdEntry. This object is only used for the notification.

    jnxSoamPmNotificationObjThresholdConfig

    jnxSoamPmNotificationObj 3

    Denotes the configured threshold value of the object that caused the generation of the notification. This object is only used for the notification.

    jnxSoamPmNotificationObjThresholdValue

    jnxSoamPmNotificationObj 4

    Denotes the measured value of the object at the time of the generation of the Notification, from the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, jnxSoamDmMeasuredStatsTable or jnxSoamDmCurrentStatsTable. This object is only used for the notification.

    jnxSoamPmNotificationObjSuspect

    jnxSoamPmNotificationObj 5

    Denotes the suspect flag for the current Measurement Interval in which the notification was generated from the jnxSoamLmCurrentStatsTable, or jnxSoamDmCurrentStatsTable. This object is only used for the notification.

    jnxSoamPmNotificationObjCrossingType

    jnxSoamPmNotificationObj 6

    Denotes the Notification Crossing Type of the object that caused the generation of the notification from the jnxSoamLmThresholdEntry or jnxSoamDmThresholdEntry.

    aboveAlarm(1)—Indicates that the crossing type alarm was an above threshold

    setAlarm(2)—Indicates that the crossing type alarm was a set threshold

    clearAlarm(3)—Indicates that the crossing type alarm was a clear threshold This object is only used for the notification.

    jnxSoamPmNotificationObjDestinationMep

    jnxSoamPmNotificationObj 7

    Denotes the MAC address of the Destination MEP associated the notification found in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable. This object is only used for the notification.

    jnxSoamPmNotificationObjPriority

    jnxSoamPmNotificationObj 8

    Denotes the CoS priority of the associated notification found in either the jnxSoamDmCfgTable or jnxSoamLmCfgTable. This object is only used for the notification.

    Modified: 2017-09-13