Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Managed Objects for jnxSoamDmThresholdCfgTable

    The jnxSoamDmThresholdCfgTable, whose object identifier is {jnxSoamPmDmObjects 5}, contains the jnxSoamDmThresholdCfgEntry that signifies the Ethernet delay measurement (ETH-DM) configuration threshold values. Each jnxSoamDmThresholdCfgEntry, whose object identifier is {jnxSoamDmThresholdCfgTable 1}, contains the objects listed in the following table.

    The jnxSoamDmThresholdCfgTable contains the list of delay measurement configuration threshold values for DM Performance Monitoring. The main purpose of the threshold configuration table is to configure threshold alarm notifications indicating that a specific performance metric is not being met. Each row in the table represents a delay measurement session threshold set for the defined MEP. This table uses five indices. The first three indices are the indices of the Maintenance Domain, MaNet, and MEP tables. The fourth index is the specific DM session on the selected MEP. The fifth index is the specific threshold set number. Rows in this table are not created automatically. A row is created in this table to set up a threshold set on a configured MEP that has a configured DM session. If two managers try to 'create' the same row at the same time, the first creation would succeed, the second creation attempt would result in an error. The second creation attempt would then need to select a new index value to successfully create a new row. An NE needs to support at least one threshold set for NE SOAM PM compliance. A second threshold set on the NE is desirable. More than two threshold sets can be configured on the NE if supported on the NE. All the objects in the row have a default value that disables the particular threshold measurement. In order to enable a threshold measurement the particular bit in the jnxSoamDmThresholdCfgEnable object is to be set to '1' and the selected threshold measurement is to have a threshold value configured. Non-configured threshold measurements are disabled by default. The writable objects in this table need to be persistent upon reboot or restart of a device.

    Table 1: jnxSoamDmThresholdCfgTable

    Object

    Object ID

    Description

    jnxSoamDmThresholdCfgIndex

    jnxSoamDmThresholdCfgEntry 1

    Denotes the index of the threshold number for the specific DM threshold entry. An index value of '1' needs to be supported. Other index values can also be supported.

    jnxSoamDmThresholdCfgEnable

    jnxSoamDmThresholdCfgEntry 2

    Contains a vector of bits that indicates the type of SOAM DM thresholds notifications that are enabled. A bit set to '1' enables the specific SOAM DM threshold notification and when the specific counter is enabled and the threshold is crossed a notification is generated. A bit set to '0' disables the specific SOAM DM threshold notification. If a particular SOAM DM threshold is not supported the BIT value is set to '0'.

    bJnxSoamDmMeasuredFrameDelayTwoWayThreshold(0)—Enables or disables measured frame two-way delay threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsFrameDelayTwoWay value is greater than or equal to threshold value.

    bJnxSoamDmMaxFrameDelayTwoWayThreshold(1)—Enables or disables maximum frame two-way delay threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayTwoWayMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayTwoWayThreshold(2)—Enables or disables average frame two-way delay threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayTwoWayAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMeasuredIfdvTwoWayThreshold(3)—Enables or disables measured frame IFDV two-way threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsIfdvTwoWay value is greater than or equal to threshold value.

    bJnxSoamDmMaxIfdvTwoWayThreshold(4)—Enables or disables maximum frame IFDV two-way threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsIfdvTwoWayMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgIfdvTwoWayThreshold(5)—Enables or disables average frame IFDV two-way threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsIfdvTwoWayAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMaxFrameDelayRangeTwoWayThreshold(6)—Enables or disables maximum Frame Delay Range two-way threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayRangeTwoWayMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayRangeTwoWayThreshold(7)—Enables or disables average Frame Delay Range two-way threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayRangeTwoWayAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMeasuredFrameDelayForwardThreshold(8)—Enables or disables measured forward frame delay threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsFrameDelayForward value is greater than or equal to threshold value.

    bJnxSoamDmMaxFrameDelayForwardThreshold(9)—Enables or disables maximum forward frame delay threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayForwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayForwardThreshold(10)—Enables or disables average forward frame delay threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayForwardAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMeasuredIfdvForwardThreshold(11)—Enables or disables measured frame IFDV forward threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsIfdvForward value is greater than or equal to threshold value. bJnxSoamDmMaxIfdvForwardThreshold(12)—Enables or disables maximum frame IFDV forward threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsIfdvForwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgIfdvForwardThreshold(13)—Enables or disables average frame IFDV forward threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsIfdvForwardAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMaxFrameDelayRangeForwardThreshold(14)—Enables or disables maximum Frame Delay Range forward threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayRangeForwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayRangeForwardThreshold(15)—Enables or disables average Frame Delay Range forward threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayRangeForwardAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMeasuredFrameDelayBackwardThreshold(16)—Enables or disables measured backward frame delay threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsFrameDelayBackward value is greater than or equal to threshold value.

    bJnxSoamDmMaxFrameDelayBackwardThreshold(17)—Enables or disables maximum backward frame delay threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayBackwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayBackwardThreshold(18)—Enables or disables average backward frame delay threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayBackwardAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMeasuredIfdvBackwardThreshold(19)—Enables or disables measured frame IFDV backward threshold notification. The notification is sent immediately when the jnxSoamDmMeasuredStatsIfdvBackward value is greater than or equal to threshold value.

    bJnxSoamDmMaxIfdvBackwardThreshold(20)—Enables or disables maximum frame IFDV backward threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsIfdvBackwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgIfdvBackwardThreshold(21)—Enables or disables average frame IFDV backward threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsIfdvBackwardAvg value is greater than or equal to the threshold value.

    bJnxSoamDmMaxFrameDelayRangeBackwardThreshold(22)—Enables or disables maximum Frame Delay Range backward threshold notification. The notification is sent immediately when the jnxSoamDmCurrentStatsFrameDelayRangeBackwardMax value is greater than or equal to threshold value in a Measurement Interval.

    bJnxSoamDmAvgFrameDelayRangeBackwardThreshold(23)—Enables or disables average Frame Delay Range backward threshold notification. The notification is sent when at the end of a Measurement Interval if the jnxSoamDmCurrentStatsFrameDelayRangeBackwardAvg value is greater than or equal to the threshold value.

    jnxSoamDmThresholdCfgAvgFrameDelayTwoWayThreshold

    jnxSoamDmThresholdCfgEntry 3

    Sets the average two-way delay threshold value that will be used to determine if a threshold notification is generated.

    jnxSoamDmThresholdCfgAvgIfdvTwoWayThreshold

    jnxSoamDLmThresholdCfgEntry 4

    Sets the average two-way IFDV threshold value that will be used to determine if a threshold notification is generated.

    jnxSoamDmThresholdCfgRowStatus

    jnxSoamDmThresholdCfgEntry 5

    Specifies the status of the ETH-DM threshold configuration row status. The writable columns in a row cannot be changed if the row is active. All columns are to have a valid value before a row can be activated.

    Modified: 2017-09-13