Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Managed Objects for jnxSoamDmCurrentStatsTable

    The jnxSoamDmCurrentStatsTable, whose object identifier is {jnxSoamPmDmObjects 3}, contains the jnxSoamDmCurrentStatsEntry that signifies the Ethernet delay measurement (ETH-DM) historical statistical details. Each jnxSoamDmCurrentStatsEntry, whose object identifier is {jnxSoamDmCurrentStatsTable 1}, contains the objects listed in the following table.

    The jnxSoamDmCurrentStatsTable contains the results for the current Measurement Interval in a SOAM Delay Measurement session gathered during the interval indicated by iterator count. A row in this table is created automatically by the SNMP Agent when the Delay Measurement session is configured. Each row in the table represents the current statistics for a Delay Measurement session for the defined MEP. This table uses four indices. The first three indices are the indices of the Maintenance Domain, MaNet, and MEP tables. The fourth index is the specific DM session on the selected MEP. There can be more than one DM session per MEP. The objects in this table apply regardless of the value of jnxSoamDmCfgType unless otherwise specified in the object description. Backward and two-way statistic objects are undefined if jnxSoamDmCfgType is dm1DmRx. Except for jnxSoamDmCurrentStatsIndex, jnxSoamDmCurrentStatsStartTime jnxSoamDmCurrentStatsElapsedTime and jnxSoamDmCurrentStatsSuspect, each object in this table applies only if the corresponding bit is set in jnxSoamDmCfgMeasurementEnable. The objects in this table do not need to be persistent upon reboot or restart of a device.

    Table 1: jnxSoamDmCurrentStatsTable

    Object

    Object ID

    Description

    jnxSoamDmCurrentStatsIndex

    jnxSoamDmCurrentStatsEntry 1

    Specifies the index for the Measurement Interval within this PM session. This value will become the value for jnxSoamDmHistoryStatsIndex once the Measurement Interval is completed.

    Measurement Interval indexes are assigned sequentially by the SNMP Agent. The first Measurement Interval that occurs after the session is started is assigned index 1.

    jnxSoamDmCurrentStatsStartTime

    jnxSoamDmCurrentStatsEntry 2

    Specifies the time at which the Measurement Interval started.

    jnxSoamDmCurrentStatsElapsedTime

    jnxSoamDmCurrentStatsEntry 3

    Specifies the length of time for which the Measurement Interval has been running, in 0.01 seconds.

    jnxSoamDmCurrentStatsSuspect

    jnxSoamDmCurrentStatsEntry 4

    Indicates whether the Measurement Interval has been marked as suspect. The object is set to false at the start of a measurement interval. It is set to true when there is a discontinuity in the performance measurements during the Measurement Interval. Conditions for a discontinuity include, but are not limited to the following:

    1—The local time-of-day clock is adjusted by at least 10 seconds

    2—The conducting of a performance measurement is halted before the current Measurement Interval is completed

    3—A local test, failure, or reconfiguration that disrupts service

    jnxSoamDmCurrentStatsFrameDelayTwoWayMin

    jnxSoamDmCurrentStatsEntry 5

    Contains the minimum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsFrameDelayTwoWayMax

    jnxSoamDmCurrentStatsEntry 6

    Contains the maximum two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsFrameDelayTwoWayAvg

    jnxSoamDmCurrentStatsEntry 7

    Contains the average two-way frame delay calculated by this MEP for this Measurement Interval. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsFrameDelayForwardMin

    jnxSoamDmCurrentStatsEntry 8

    Contains the minimum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsFrameDelayForwardMax

    jnxSoamDmCurrentStatsEntry 9

    Contains the maximum one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsFrameDelayForwardAvg

    jnxSoamDmCurrentStatsEntry 10

    Contains the average one-way frame delay in the forward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsFrameDelayBackwardMin

    jnxSoamDmCurrentStatsEntry 11

    Contains the minimum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsFrameDelayBackwardMax

    jnxSoamDmCurrentStatsEntry 12

    Contains the maximum one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsFrameDelayBackwardAvg

    jnxSoamDmCurrentStatsEntry 13

    Contains the average one-way frame delay in the backward direction calculated by this MEP for this Measurement Interval. The value of this object may not be accurate in the absence of sufficiently precise clock synchronization. This object is undefined is jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvForwardMin

    jnxSoamDmCurrentStatsEntry 14

    Contains the minimum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsIfdvForwardMax

    jnxSoamDmCurrentStatsEntry 15

    Contains the maximum one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsIfdvForwardAvg

    jnxSoamDmCurrentStatsEntry 16

    Contains the average one-way inter-frame delay interval in the forward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx.

    jnxSoamDmCurrentStatsIfdvBackwardMin

    jnxSoamDmCurrentStatsEntry 17

    Contains the minimum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvBackwardMax

    jnxSoamDmCurrentStatsEntry 18

    Contains the maximum one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvBackwardAvg

    jnxSoamDmCurrentStatsEntry 19

    Contains the average one-way inter-frame delay interval in the backward direction calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvTwoWayMin

    jnxSoamDmCurrentStatsEntry 20

    Contains the minimum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvTwoWayMax

    jnxSoamDmCurrentStatsEntry 21

    Contains the maximum two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsIfdvTwoWayAvg

    jnxSoamDmCurrentStatsEntry 22

    Contains the average two-way inter-frame delay interval calculated by this MEP for this Measurement Interval. The value of this object is undefined when jnxSoamDmCfgType is dm1DmTx or dm1DmRx.

    jnxSoamDmCurrentStatsSoamPdusSent

    jnxSoamDmCurrentStatsEntry 23

    Contains the count of the number of SOAM PDUs sent during this Measurement Interval. This object applies when jnxSoamDmCfgType is dmDmm or dm1DmTx and is undefined if jnxSoamDmCfgType is dm1DmRx. It indicates the number of DMM or 1DM SOAM frames transmitted.

    jnxSoamDmCurrentStatsSoamPdusReceived

    jnxSoamDmCurrentStatsEntry 24

    Contains the count of the number of SOAM PDUs received in this Measurement Interval. This object indicates the number of DMR and 1DM SOAM frames received. This object applies when jnxSoamDmCfgType is dmDmm or dm1DmRx and is undefined if jnxSoamDmCfgTypeis dm1DmTx.

    Modified: 2017-09-13