Hardware Requirements for Dynamic Hierarchical CoS
Table 1 lists the hardware requirements based on subscriber interface type for hierarchical scheduling in dynamic CoS configurations.
Table 1: Hardware Required for Dynamic Hierarchical CoS Configurations
Dynamic CoS Configuration | Subscriber Interface Type | EQ DPCs on MX Series Routers | MPC Q/MIC Modules on MX Series Routers |
|---|---|---|---|
| Hierarchical CoS | Static and dynamic VLANs | Yes | Yes |
Static and dynamic VLANs over aggregated Ethernet | Yes | Yes | |
Static or dynamic IP demux interfaces | Yes | Yes | |
Static or dynamic IP demux interfaces over aggregated Ethernet | Yes | Yes | |
Static or dynamic VLAN demux interfaces | No | Yes | |
Static or dynamic VLAN demux interfaces over aggregated Ethernet | No | Yes | |
Static PPPoE interfaces | No | Yes | |
Dynamic PPPoE interfaces | No | Yes | |
Static or dynamic PPPoE interfaces over aggregated Ethernet | No | Yes | |
L2TP LAC tunnel over PPP | No | Yes | |
L2TP LNS inline service over PPP | No | Yes |