Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

vmhost management-if speed

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 15.1F6.

Note

The command is supported on the routers with RE-MX-X6, RE-MX-X8, and RE-PTX-X8 Routing Engines only.

Statement introduced in Junos OS Release 18.1R1 for the QFX10002-60C switches.

Statement introduced in Junos OS Release 18.2R1 for the PTX10002-60C routers.

Description

Configure the link speed of the host interface eth0, which serves as the management port. If you set the link speed as 10m or 100m, autonegotiation is turned off and the link speed is the speed that you specify.

Default

The link partners auto-negotiate the speed and duplex link mode and select the highest common capability.

Options

automaticAutonegotiate the link speed of the management interface. If you set the link speed as automatic, speed and link mode are auto-negotiated with the link partner.
10mSet the link speed of the management interface to 10Mbps.
100mSet the link speed of the management interface to 100Mbps
1gSet the link speed of the management interface to 1Gbps. If you set link speed to 1Gbps, autonegotiation is enabled. However, the interface advertises only 1Gbps speed and full-duplex mode.

Required Privilege Level

system—To view this statement in the configuration.

system-control—To add this statement to the configuration.