vmhost management-if link-mode
Statement introduced in Junos OS Release 15.1F6.
The command is supported on the routers with RE-MX-X6, RE-MX-X8, and RE-PTX-X8 Routing Engines only.
Statement introduced in Junos OS Release 18.1R1 for the QFX10002-60C switches.
Statement introduced in Junos OS Release 18.2R1 for the PTX10002-60C routers.
Statement introduced in Junos OS Release 19.2R1-S1 for the ACX5448-D routers and the ACX5448-M routers.
Configure the link mode of the host interface eth0, which serves as the management port as half-duplex or full-duplex. You can also manually select the link mode option as either half-duplex or full-duplex.
The link partners auto-negotiate the speed and duplex link mode and select the highest common capability.
Required Privilege Level
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.