validation-state (Origin Validation for BGP)
Statement introduced in Junos OS Release 12.2.
Statement introduced in Junos OS Release 12.3 for ACX Series routers.
Configure the validation state for a route validation record.
invalid—A negative (invalid) validation state. Indicates that the prefix is found, but either the corresponding AS received from the EBGP peer is not the AS that appears in the database, or the prefix length in the BGP update message is longer than the maximum length permitted in the database.
valid—A positive (valid) validation state. Indicates that the prefix and AS pair are found in the database.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.