unit (Dynamic Interface Sets)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 10.4.
Description
Apply the logical interface unit to the interface set.
Options
logical-unit-number—One of the following options:
$junos-underlying-interface-unit—For static VLANs, the unit number variable. The static unit number variable is dynamically replaced with the client unit number when the client session begins. The client unit number is specified by the DHCP when it accesses the subscriber network.
$junos-interface-unit—For dynamic demux and dynamic PPPoE interfaces, the unit number variable. The static unit number variable is dynamically replaced with the client unit number when the client session begins. The client unit number is specified by the DHCP or PPP when it accesses the subscriber network.
value—Specific unit number of the interface you want to assign to the dynamic-profile
Range: 0 through 1,073,741,823.
The remaining statements are explained separately. Search for a statement in CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Related Documentation
Configuring Dynamic VLAN Subscriber Interfaces Based on Agent Circuit Identifier Information
Applying Traffic Shaping and Scheduling to a Subscriber Interface in a Dynamic Profile
Configuring an Interface Set of Subscribers in a Dynamic Profile
Guidelines for Configuring Dynamic CoS for Subscriber Access