Statement introduced before Junos OS Release 7.4.
For ATM over SONET/SDH, SONET/SDH interfaces, and 10-Gigabit Ethernet interfaces in WAN PHY mode, configure SONET/SDH defect triggers to be ignored.
If you do not include this statement, all SONET/SDH defect triggers are honored.
defect—Defect to ignore or hold. It can be one of the following:
ais-l—Line alarm indication signal
ais-p—Path alarm indication signal
ber-sd—Bit error rate signal degrade
ber-sf—Bit error rate signal fault
locd (ATM only)—Loss of cell delineation
lof—Loss of frame
lol—PHY loss of light
lop-p—Path loss of pointer
los—Loss of signal
pll—PHY phase-locked loop out of lock
plm-p—Path payload (signal) label mismatch
rfi-l—Line remote failure indication
rfi-p—Path remote failure indication
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.