EX Series (Except EX4600), M Series, MX Series, PTX Series,
QFX Series including QFabric, OCX OCX1100, EX4600, NFX Series
Statement was introduced in Junos OS Release 7.6 (EX series, M series, MX series, T series, and PTX series devices).
Statement was introduced in Junos OS Release 11.1 for the QFX Series.
Statement was introduced in Junos OS Release 12.3 for ACX series routers.
Statement was introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
ACX Series Routers
Configure traffic-shaping profiles.
For CoS on ACX6360-OR, see the documentation for the PTX1000.
EX Series (Except EX4600), M Series, MX Series, T Series, and PTX Series Routers
For Gigabit Ethernet IQ, Channelized IQ PICs, FRF.15 and FRF.16 LSQ interfaces, Enhanced Queuing (EQ) DPCs, and PTX Series routers only, configure traffic shaping and scheduling profiles. For Enhanced EQ PICs, EQ DPCs, and PTX Series routers only, you can include the excess-rate statement.
QFX Series QFabric, OCX1100, EX4600, NFX Series
Configure traffic shaping and scheduling profiles for forwarding class sets (priority groups) to implement enhanced transmission selection (ETS) or for logical interfaces.
profile-name—Name of the traffic-control profile. This name is also used to specify an output traffic control profile.
The remaining statements are explained separately. See CLI Explorer or click a linked statement in the Syntax section for details.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.