Statement introduced in Junos OS Release 10.0.
Support for logical systems introduced in Junos OS Release 14.1.
Configure Interchassis Control Protocol (ICCP) between the multichassis link aggregation group (MC-LAG) peers. ICCP replicates forwarding information, validates configurations, and propagates the operational state of the MC-LAG members.
If you do not include this statement, no ICCP protocol tracing operations are performed.
traceoptions—Set Interchassis Control Protocol (ICCP) tracing options.
local-ip-address—Specify the source address where the ICCP packet is routed.
session-establishment-hold-time—Specify if the chassis takes over as the primary at the ICCP session.
authentication-key —Specify TCP Message Digest 5 (MD5) option for an ICCP TCP session.
peer ip-address—Specify the IP address of the peer that hosts an MC-LAG. You must configure ICCP for both peers that host the MC-LAG.
redundancy-group-id-list—Specify the redundancy groups between two ICCP peers. The value you assign to this option must match the value you assign to the redundancy-group-id option that you configure on the MC-AE interface. If the value differs, when you commit the changes, the system reports a commit check error.
liveness-detection—Specify Bidirectional Forwarding Detection (BFD) protocol options.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.