term (Firewall Filter)
Statement introduced before Junos OS Release 7.4.
filter option introduced in Junos OS Release 7.6.
Logical systems support introduced in Junos OS Release 9.3.
ip-version ipv4 support introduced in Junos OS Release 10.1.
Statement introduced in Junos OS Release 12.3R2 for EX Series switches.
Define a firewall filter term.
actions—(Optional) Actions to perform on the packet if conditions match. You can specify one terminating action supported for the specified filter type. If you do not specify a terminating action, the packets that match the conditions in the from statement are accepted by default. As an option, you can specify one or more nonterminating actions supported for the specified filter type.
from—(Optional) Match packet fields to values. If not included, all packets are considered to match and the actions and action modifiers in the then statement are taken.
match-conditions—One or more conditions to use to make a match on a packet.
match-conditions-mpls-ipv4-address—(MPLS-tagged IPv4 traffic only) One or more IP address match conditions to match on the IPv4 packet header. Supports network-based service in a core network with IPv4 packets as an inner payload of an MPLS packet with labels stacked up to five deep.
match-conditions-mpls-ipv4-port—(MPLS-tagged IPv4 traffic only) One or more UDP or TCP port match conditions to use to match a packet in an MPLS flow. Supports network-based service in a core network with IPv4 packets as an inner payload of an MPLS packet with labels stacked up to five deep.
vxlan—(Optional) Match packets belonging to a particular VXLAN Network Identifier (VNI).
term-name—Name that identifies the term. The name can contain letters, numbers, and hyphens (-) and can be up to 64 characters long. To include spaces in the name, enclose it in quotation marks (“ ”).
then—(Optional) Actions to take on matching packets. If not included and a packet matches all the conditions in the from statement, the packet is accepted.
The Firewall Filer Match Conditions for the different protocols are explained separately:
Required Privilege Level
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.