Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

tca

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 14.2 on the PTX Series.

Statement introduced in Junos OS Release 18.3R1 for PTX10K-LC1104 on the PTX10008 and PTX10016 routers.

Statement introduced in Junos OS Release 19.2R1-S1 for ACX5448-D routers.

Description

TCAs can give the management system an early indication as to the state of the associated entity when it crosses a certain threshold. TCAs can be set for both minimum and maximum values for gauges and only maximum values for counters. The timely detection of TCAs is essential to proactively manage the interface. TCAs are not an indication of a fault, but rather an indication that the entity may be close to a fault. You can choose which TCAs you want monitored by enabling the TCA. You can either keep the default threshold settings or change the settings.

Enable threshold crossing alerts (TCAs) for the following:

  • Optical channel data unit (ODU)

  • Optical channel transport unit (OTU)

  • Laser power

  • Laser temperature

Default

By default, TCAs are not enabled.

Options

tca-identifier —At the otn-options hierarchy level, it can be one of the following:

  • odu-tca-bbe—ODU background block error threshold-crossing defect trigger

  • odu-tca-bbe-fe—ODU far-end background block error threshold-crossing defect trigger

  • odu-tca-es—ODU errored seconds threshold-crossing defect trigger

  • odu-tca-es-fe—ODU far-end errored seconds threshold-crossing defect trigger

  • odu-tca-ses—ODU severely errored seconds threshold-crossing defect trigger

  • odu-tca-ses-fe—ODU far-end severely errored seconds threshold-crossing defect trigger

  • odu-tca-uas—ODU unavailable seconds threshold-crossing defect trigger

  • odu-tca-uas-fe—ODU far-end unavailable seconds threshold-crossing defect trigger

  • otu-tca-bbe—OTU background block error threshold-crossing defect trigger

  • otu-tca-bbe-fe—OTU far-end background block error threshold-crossing defect trigger

  • otu-tca-es—OTU errored seconds threshold-crossing defect trigger

  • otu-tca-es-fe—OTU far-end errored seconds threshold-crossing defect trigger

  • otu-tca-fec-ber—OTU forward error correction bit error rate threshold-crossing defect trigger

  • otu-tca-ses—OTU severely errored seconds threshold-crossing defect trigger

  • otu-tca-ses-fe—OTU far-end severely errored seconds threshold-crossing defect trigger

  • otu-tca-uas—OTU unavailable seconds threshold-crossing defect trigger

  • otu-tca-uas-fe—OTU far-end unavailable seconds threshold-crossing defect trigger

tca-identifier —At the optics-options hierarchy level, it can be one of the following:

  • carrier-frequency-offset-high-tca—Carrier frequency high threshold setting trigger

  • carrier-frequency-offset-low-tca—Carrier frequency low threshold setting trigger

  • fec-ber—Optics Errored Seconds Threshold crossing defect trigger

  • fec-corrected-errors-high-tca—FEC Corrected Error High Threshold crossing defect trigger

  • fec-ucorrected-words-high-tca—FEC Uncorrected Words High Threshold crossing defect trigger

  • laser-frequency-error-high-tca—Laser frequency error high TCA

  • laser-frequency-error-low-tca—Laser frequency error low TCA

  • pam-histogram-high-tca—PAM Histogram high TCA

  • residual-isi-high-tca—Residual ISI high TCA

  • residual-isi-low-tca—Residual ISI low TCA

  • rx-power-high-tca—Rx power high threshold setting trigger

  • rx-power-low-tca—Rx power low threshold setting trigger

  • snr-low-tca—SNR low TCA

  • tec-current-high-tca—TEC Current high TCA

  • tec-current-low-tca—TEC Current low TCA

  • temperature-high-tca—Temperature high threshold setting trigger

  • temperature-low-tca—Temperature low threshold setting trigger

  • tx-power-high-tca—Tx power high threshold setting trigger

  • tx-power-low-tca—Tx power low threshold setting trigger

enable-tca | no-enable-tca—To enable or disable the threshold crossing alert.

threshold | threshold-24hrs:

  • threshold number—Set the 15-minute interval threshold.

  • threshold-24hrs number—Set the 24-hour interval threshold.

Required Privilege Level

interface—To view this statement in the configuration.

interface-control—To add this statement to the configuration.