Statement introduced in Junos OS Release 17.2R1.
Enable threshold crossing alerts (TCAs) for the following:
By default, TCAs are not enabled.
tca-identifier —At the optics-options hierarchy level, it can be one of the following:
carrier-frequency-offset-high-tca—Carrier frequency high threshold setting trigger
carrier-frequency-offset-low-tca—Carrier frequency low threshold setting trigger
rx-power-high-tca—Rx power high threshold setting trigger
rx-power-low-tca—Rx power low threshold setting trigger
temperature-high-tca—Temperature high threshold setting trigger
temperature-low-tca—Temperature low threshold setting trigger
tx-power-high-tca—Tx power high threshold setting trigger
tx-power-low-tca—Tx power low threshold setting trigger
enable-tca | no-enable-tca—To enable or disable the threshold crossing alert.
threshold | threshold-24hrs:
threshold number—Set the 15-minute interval threshold.
threshold-24hrs number—Set the 24-hour interval threshold.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.