t3-options
Syntax
t3-options {
atm-encapsulation (direct | plcp);
bert-algorithm algorithm;
bert-error-rate rate;
bert-period seconds;
(cbit-parity | no-cbit-parity);
compatibility-mode (digital-link | kentrox | larscom) <subrate value>;
fcs (16 | 32);
(feac-loop-respond | no-feac-loop-respond);
idle-cycle-flag value;
(long-buildout | no-long-buildout);
(loop-timing | no-loop-timing);
loopback (local | payload | remote);
start-end-flag value;
}
Hierarchy Level
[edit interfaces interface-name]
Release Information
Statement introduced before Junos OS Release 7.4.
Description
Configure T3-specific physical interface properties, including the properties of DS3 channels on a channelized OC12 interface. The long-buildout statement is not supported for DS3 channels on a channelized OC12 interface.
On T3 interfaces, the default encapsulation is PPP.
For ATM1 interfaces, you can configure a subset of E3 options statements.
The remaining statements are explained separately. See CLI Explorer.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.