Statement introduced before Junos OS Release 7.4.
The burst-size option added for MIC and MPC interfaces on MX Series routers in Junos OS Release 11.4.
Define a limit on excess bandwidth usage for a forwarding class/queue.
The transmit-rate statement at the [edit class-of-service schedulers scheduler-name] hierarchy level configures the minimum bandwidth allocated to a queue. The transmission bandwidth can be configured as an exact value or allowed to exceed the configured rate if additional bandwidth is available from other queues.
Configure the shaping rate as an absolute maximum usage and not the additional usage beyond the configured transmit rate.
If you do not include this statement, the default shaping rate is 100 percent, which is the same as no shaping at all.
percent percentage—Shaping rate as a percentage of the available interface bandwidth.
Range: 0 through 100 percent
If you configure a shaping rate as a percent in a scheduler, the effective shaping rate is calculated based on the following hierarchy:
Logical interface shaping rate, if configured
Physical interface shaping rate, if configured
Physical interface bandwidth
With SRX300, SRX320, SRX340, SRX345, SRX550m, SRX1500, and vSRX2.0 devices, you can configure both logical interface shaping rates and physical interface shaping rates on the same physical interface. On all other models, you can only configure one or the other on a particular physical interface.
rate—Peak rate, in bits per second (bps). You can specify a value in bits per second either as a complete decimal number or as a decimal number followed by the abbreviation k (1000), m (1,000,000), or g (1,000,000,000).
Range: 3200 through 6,400,000,000,000 bps
Through Junos OS Release 13.3, the upper limit is 160,000,000,000 bps. Beginning with Junos OS Release 14.1, the upper limit is 6,400,000,000,000 bps.
burst-size bytes—Maximum burst size, in bytes. The burst value determines the number of rate credits that can accrue when the queue or scheduler node is held in the inactive round robin.
Range: 0 through 1,000,000,000
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.