service-package (ACX Series)
Syntax
Hierarchy Level
Release Information
Statement introduced in Junos OS Release 12.3X54 for ACX1100 routers.
Description
On ACX1100 routers, enable a service package on the specified Flexible Port Concentrator (FPC) slot. You can configure a service package on the router for the RFC 2544-based benchmarking test, or for NAT and IPsec applications. When you configure the service package for the RFC 2544-based benchmarking test or for the NAT and IPsec applications, a reboot of the Forwarding Engine Board (FEB) occurs to apply the service package selection. By default, the service package for RFC 2544 benchmarking test is selected. The selection of a service package is needed on ACX1100 routers when you configure such routers for IEEE 1588v2 Precision Time Protocol (PTP) because both RFC 2544-based benchmarking tests and a combination of NAT and IPsec protocols are not supported simultaneously; you can configure only PTP and RFC 2544-based tests, or PTP and the combination of NAT and IPsec at a point in time.
You need to specify the service package to be RFC 2544-based or NAT and IPsec-based only for ACX1100-AC routers. The selection of a service package is not needed on ACX Series routers other than the ACX1100-AC and ACX500 routers because on such routers, only the RFC 2544-based benchmarking tests are supported; NAT and IPsec applications are not supported on those routers.
Default
bundle-rfc2544
Options
bundle-rfc2544—Enable the RFC 2544-based service package on the specified FPC.
bundle-nat-ipsec—Enable the service package for NAT and IPsec protocols on the specified FPC.
Required Privilege Level
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
