sensor-based-stats (Protocols IS-IS)
Syntax
sensor-based stats {
per-interface-per-member-link {
egress;
ingress;
}
per-sid {
egress;
ingress;
}
}
Hierarchy Level
[edit protocols isis source-packet-routing],
Release Information
Statement introduced in Junos OS Release
17.4R1.
Description
Enable the collection of aggregate segment routing
statistics for the Source Packet Routing in Networking (SPRING) traffic
only, excluding RSVP and LDP-signaled traffic. Family MPLS statistics
per interface are accounted for separately. The SR statistics also
include SPRING traffic statistics per link aggregation group (LAG)
member and per segment identifier (SID). The statistics are collected
using the Juniper telemetry interface in an OpenConfig compliant format
for Layer 3 interfaces.
NoteThis statement is also available for LDP and MPLS statistics.
For more information see sensor-based-stats (Junos Telemetry Interface).
For additional information about configuring these statistics
sensors to stream data through gRPC, see Guidelines for gRPC and gNMI Sensors (Junos Telemetry Interface).
Options
per-interface-per-member-link—Configure sensor-based statistics per nexthop. Sensor-based
statistics is the traffic statistics in a segment routing (SR) network
that can be recorded in an OpenConfig compliant format for Layer 3
interfaces. The statistics is recorded for the Source Packet Routing
in Networking (SPRING) traffic only, excluding RSVP and LDP-signaled
traffic, and the family MPLS statistics per interface is accounted
for separately. The SR statistics also includes SPRING traffic statistics
per link aggregation group (LAG) member, and per segment identifier
(SID).
egress—Enable sensor
based statistics on the egress interface.
ingress—Enable sensor
based statistics on the ingress interface.
NoteOn PTX Series Routers, the sensor based statistics for
SPRING traffic is recorded at the ingress interface only.
per-sid—Configure sensor
based statistics per Source Packet Routing in Networking (SPRING)
route. Sensor-based statistics is the traffic statistics in a segment
routing (SR) network that can be recorded in an OpenConfig compliant
format for Layer 3 interfaces. The statistics is recorded for SPRING
traffic only, excluding RSVP and LDP-signaled traffic, and the family
MPLS statistics per interface is accounted for separately. The SR
statistics also includes SPRING traffic statistics per link aggregation
group (LAG) member, and per segment identifier (SID).
egress—Enable sensor
based statistics for IP-MPLS egress accounting. This is supported
only for segment routing label IS-IS egress routes at the ingress
provider edge (PE) device.
ingress—Enable sensor
based statistics for per-sid ingress accounting.
Required Privilege Level
routing