priority (Security User Identification)
Statement introduced in Junos OS Release 12.3X48-D30.
Set the lookup priority to identify the order in which the SRX Series device checks its configured authentication tables for user authentication information. Authentication tables are searched in order based on their priority setting in which lowest value takes precedence.
For the integrated ClearPass authentication and enforcement feature, the SRX Series device must be configured to search the ClearPass authentication table first.
Note that both the authentication source, Aruba ClearPass, and the SRX Series ClearPass authentication table are both referred to as aruba-clearpass in the CLI and its output.
You need to set this value only if the local authentication table, whose default value is 100, also resides on the Packet Forwarding Engine. In that case, you must configure a higher priority value, such as 120, for the local authentication table.
Range: 1 through 65535.
Default values for other authentication tables:
Local authentication table: 100
Active Directory (AD) table: 125
UAC authentication table: 150
Firewall authentication table: 200
Required Privilege Level
security—To view this statement in the configuration.
security-control—To add this statement to the configuration.