Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

protocols (Security Zones Interfaces)

 

Syntax

Hierarchy Level

Release Information

Statement introduced in Junos OS Release 8.5.

Description

Specify the types of routing protocol traffic that can reach the device on a per-interface basis.

Options

  • protocol-name —Protocol for which traffic is allowed. The following protocols are supported:

    • all—Enable traffic from all possible protocols available.

    • bfd—Enable incoming Bidirectional Forwarding Detection (BFD) Protocol traffic.

    • bgp—Enable incoming BGP traffic.

    • dvmrp—Enable incoming Distance Vector Multicast Routing Protocol (DVMRP) traffic.

    • igmp—Enable incoming Internet Group Management Protocol (IGMP) traffic.

    • ldp—Enable incoming Label Distribution Protocol (LDP) traffic (UDP and TCP port 646).

    • msdp—Enable incoming Multicast Source Discovery Protocol (MSDP) traffic.

    • nhrp—Enable incoming Next Hop Resolution Protocol (NHRP) traffic.

    • ospf—Enable incoming OSPF traffic.

    • ospf3—Enable incoming OSPF version 3 traffic.

    • pgm—Enable incoming Pragmatic General Multicast (PGM) protocol traffic (IP protocol number 113).

    • pim—Enable incoming Protocol Independent Multicast (PIM) traffic.

    • rip—Enable incoming RIP traffic.

    • ripng—Enable incoming RIP next generation traffic.

    • router-discovery—Enable incoming router discovery traffic.

    • rsvp—Enable incoming Resource Resolution Protocol (RSVP) traffic (IP protocol number 46).

    • sap— Enable incoming Session Announcement Protocol (SAP) traffic. SAP always listens on 224.2.127.254:9875.

    • vrrp—Enable incoming Virtual Router Redundancy Protocol (VRRP) traffic.

except—(Optional) except can only be used if all has been defined.

Required Privilege Level

security—To view this statement in the configuration.

security-control—To add this statement to the configuration.